Shop

RIGHTSENSE TECHNOLOGIES

RightLight with WDR

Low-light compensation

Video noise reduction

Low-light saturation optimization

Renders natural skin tones for each participant on camera

Reduces backlighting and glare without darkening the entire image.

RightSight ²Please see RightSight Availability for details.

Human figure detection

Auto-frame participants at meeting start

Auto-frame participants on-demand

Auto-reframe participants during meetings

RightSound

Machine learning AI trained to distinguish human speech from other sounds

AEC (Acoustic Echo Cancellation)

VAD (Voice Activity Detector)

Background noise suppression

Auto-level loud and soft voices

RightSound Mic Matrix

Very low distortion broadside beamforming algorithm steers the factory-paired microphones directly at the talker for the best voice pickup and noise reduction

Supports up to 56 acoustic beams (8 per Rally Mic Pod) to lock onto the active talker

Beam focus refresh rate: 8ms (125 times/second)

Anti-Vibration Suspension

A patent-pending suspension system decouples the speaker module within the external enclosure, virtually eliminating the vibrations that can travel through walls, stands, and tables. This improves the echo cancelling performance of Rally Mic Pods, while ensuring that video images remain clear and steady, even at high volume levels and when zoomed in.

Peak-limiting algorithm eliminates even momentary speaker clipping to prevent distortion

Rally Camera

Ultra-HD imaging system supports

4K, 1440p, 1080p, 900p, 720p, and SD at 30fps

1080p, 720p at 30fps and 60 fps

Smooth motorized pan, tilt and zoom

Pan: ±90°

Tilt: +50° / -90°

15X HD zoom

90° field of view

Adaptive pan and tilt speed up to 70°/second (slows when zoomed in for easier control)

Automatic inversion detection to correct image orientation and camera controls when mounted upside down

Autofocus

3 camera presets

Kensington security slot

Video mute/unmute LED indicator

Standard tripod thread

Lens parks at -90° in sleep mode for assured privacy

Rally Mic Pod

Pickup Range: 15 ft (4.5 m) diameter

Four omnidirectional microphones forming eight acoustic beams

AEC: Acoustic Echo Cancellation

VAD: Voice Activity Detector

Background noise suppression

Mute button with LED status indicator

Captive 9.6 ft (2.95m) 12-pin cable

Daisy chain up to 7 Rally Mic Pods

Frequency response: 90Hz – 16kHz

Sensitivity: >-27 dB +/-1dB @ 1Pa

Microphone data rate: 48 kHz

Recommended # of participants

Rally (one Mic Pod): 16

Rally Plus (two Mic Pods): 16

Additional participants per Mic Pod: 6

Recommended participants for Rally with 7 Mic Pods: 46

Rally Speaker

High-performance 3″ (76mm) driver with rare-earth magnet

Patent-pending suspension system eliminates vibration-induced camera shake and audio interference

Mini XLR cable connects to Rally Display Hub for both signal and power

Speaker volume 95dB SPL @1W, 100dB SPL @7.5W, both +/-2dB at ½ meter

Sensitivity: 95+/-2 dB SPL at ½ meter

Distortion: 200Hz–300Hz <2.5%, 300Hz–10kHz < 1%@7.5W

Sampling rate: 48 kHz

Rally Table Hub

Single CAT6A cable connection to Rally Display Hub (16.4 ft / 5m cable included, supports customer-supplied cables up to 164 ft (50 m)

Hub 5 m cable included, supports customer-supplied cables up to 50 m

Active speaker detection: analyzes audio from up to 7 Mic Pods and 56 beams every 8 ms

12 Pin connector for Rally Mic Pod

HDMI Type A passthrough to Display Hub (x2)

USB Type C

USB Type A (reserved for future capability)

USB Type B (connects to meeting room computer)

RJ45 (reserved for future capability)

Power input

Rally Display Hub

HDMI Type A: (x2) (connects to displays)

USB C (connects to Rally Camera)

USB Type B (connects to meeting room computer)

RJ45: connects to Table Hub

Mini XLR: x2

Powers one or two Rally Speakers

Power input

Remote Control

RF remote control (line of sight not required)

CR2032 batteries (included)

Cables / Power

Camera to Display Hub – 6.5 ft (2m) USB 3.1 Type C to USB Type C 3.1

Conference Room Computer to Display or Table Hub – 6.5 ft (2m) USB 3.1 Type A to USB Type B

Display Hub to Table Hub – 16.4 ft (5 m) CAT6A Ethernet cable (supports customer-supplied cables up to 164 ft (50 m)

Display Hub to Speaker (x2) – 9.6 ft (2.95 m) Mini XLR (supports customer-supplied extension cables up to 9.8 ft (3 m)

Conference Room Computer to Displays (x2) – 6.5 ft (2m) HDMI A

Mic Pod – 9.6 ft (2.95m): Hardwired with 12 pin connector

Power Outlets to Power Supplies (x2): 3.28 gy (1 m) – 3.2 ft (1 m)

Power Supplies to Table Hub / Display Hub (x2) – 4.9 ft (1.5 m)

AVAILABLE ACCESSORIES

RALLY MOUNTING KIT – Rally Mounting Kit with cable retainers: (x2) and mounting brackets for camera, speakers (x2), and hubs (x2)

Rally Mic Pod – Deploy up to 7 Rally Mic Pods for greater audio coverage in larger rooms

MIC POD MOUNT – Anchors mics and hides cables for a finished look

RALLY MIC POD HUB – Connect 1-3 Rally Mic Pods (or additional hubs) for placement flexibility and under-table cabling

COMPATIBILITY AND CERTIFICATIONS

Plug-and-play USB connectivity

Certified for Skype for Business and Microsoft Teams

Zoom Certified

Fuze Certified

Certified for Google Hangouts Meet Hardware

Microsoft Cortana® certified

Cisco Jabber® and WebEx compatible

Compatible with BlueJeans, BroadSoft, GoToMeeting, Video, and other video conferencing, recording, and broadcasting applications that support USB cameras